{"id":576,"date":"2025-11-19T10:01:00","date_gmt":"2025-11-19T10:01:00","guid":{"rendered":"https:\/\/shiremedical.co.uk\/home\/?post_type=product&p=576"},"modified":"2025-11-28T12:35:11","modified_gmt":"2025-11-28T12:35:11","slug":"plant-to-alarm","status":"publish","type":"product","link":"https:\/\/shiremedical.co.uk\/home\/product\/plant-to-alarm\/","title":{"rendered":"Plant to Alarm"},"content":{"rendered":"
\n
\n
\n

SDX Plant To Alarm Interface<\/h4>\n<\/header>\n
\n

Class 1 Medical Device: Medical Gas Pipeline Systems\u00a0<\/strong>For more information & documentation please\u00a0Contact us.<\/a><\/h4>\n

Features:<\/strong>
\nConnection:<\/h4>\n

The Plant To Alarm links to the SDX-15 Alarm system via 2-core data bus cable. The Transmitter accepts 4no input signals, wired from a single gas, via a 5-core cable (4no switched conditions and 1no Common).
\nThe input signals are typically monitored for integrity via an end-of-line termination board (known as a TB4 PCB).<\/h4>\n

Maintenance:
\nThe Plant To Alarm transmitter PCB requires a 230vac supply.
\nAll supply, input and data-bus terminations are via simple 45deg PCB mounted terminals.<\/h4>\n

Application:
\nThe Plant To Alarm transmitter is manufactured for a single gas input.
\nThe transmitter also provides duplicate output contacts (4no) for interfacing via a 5 core connection (again 4no conditions and 1no Common).
\nAs these units are often installed in locked compounds, we have included LEDs status to provide indication of the monitored gas and battery back-up support to ensure the unit both transmits to the SDX Plant Alarm System & locally displays status for 4 hours under loss of power.
\nThe Plant To Alarm incorporates a single channel selector switch which determines the transmitted channel for the gas.<\/h4>\n

The Plant To Alarm transmitter receives 4no analogue signals and then transmits these signals via a 2-core data-bus using Shire Controls own Medcon signal protocol. A single 2-core data-bus can transmit up to 60 status conditions (15no gases, each with 4no condition) and channels are determined via hexadecimal (16 way) rotary switches for transmitting (via SDX-15 transmitters) and receiving for display purposes (via SDX-15 Plant Alarms) or for interfacing to others (via SDX Computer Interfaces).<\/h4>\n

For monitoring of input signal wiring, a termination box is required to be mounted as close as practical to the gas source. The integrity of the cabling between the gas source and the Plant To Alarm is monitored, and a fault on this cable will result in visual system fault warning, with all affected alarm conditions going into alarm condition.<\/h4>\n

Monitoring of the data-bus connection is always in operation. The transmitter looks to receive a strobe signal from the designated \u2018Central Panel\u2019 (the 24-hour monitored SDX-15 Plant Alarm), which ensures the system data-bus integrity. Any short-circuit, open-circuit or non-presence of a Central Panel will result in the transmitter giving a visual warning of this system fault.<\/h4>\n

As the system is addressable, ALL SDX-15 system equipment (Alarms, Transmitters and Interfaces) can be added\/removed or relocated within the system. This simply requires the 2-core data-bus to be extended from the nearest existing SDX-15 Unit, or tee-ing off from a nearby existing cable run. Use 2-core screened cable (minimum 0.5mm).<\/h4>\n

Plant To Alarm LED Status Indicators:
\nThe Plant to Alarm transmitter fascia incorporates 7no block LEDs which combine to display the gas status, input and out signal integrity.
\nThe POWER ON (Left Side Green) is lit when power is present.
\nThe Gas Condition NORMAL (Green) LED is lit when all 4 fault conditions are off.
\nThe Gas Condition FAULT (Top, Middle, Bottom Yellow & Red) LED is lit when respective gas fault condition is present.
\nThe SYSTEM FAULT (Left Side RED) LED flashes when either Red or Yellow 5mm Round LED (on Power Supply) is flashing \u2013 see below.<\/h4>\n

Power Supply PCB 5mm Round LED indicators \u2013 Green, Yellow and Red:<\/h4>\n